BEEPS IN CPU AND IT"S REASON

No beep at all - this means your motherboard is dead, either due to a
defective or underpowered power supply, poorly seated CPU or RAM, or a
dead-on-arrival board

One beep - board is working fine

One long beep then machine shuts down - faulty, improperly installed or
missing CPU

1 short(Beep) System booting is normally

2 short(Beep) CMOS setting error

1 long - 1 short(Beep) DRAM ERROR

1 long - 2 short(Beep) Display card or monitor connected error

1 long - 3 short(Beep) Keyboard Error

1 long - 9 short(Beep) ROM Error

Long(Beep) continuous DRAM isn't inserted correctly

Short(Beep) continuous POWER supply has a problem

A two-tone siren, generally caused by overheating or out of specification
voltages

Four beeps then machine shuts down. This is because this version of the
BIOS will shut down your machine if no fan tachometer signal is detected
on the fan header. Make sure you attach a fan to the FAN1 or FAN4 header
or clear CMOS to reset to default (no checking).

Im getting continous beeps and the only two things that points to is either ram which i tried every possible configuration even tried removing all of it, or a power supply problem, even tho my computer power ups. Im guessing there might be a short somewhere on the board maybe a peice of material making connection somewhere, or even 1 broken wire in the power harnest to the mother board could most likely throw the entire thing off.
Last edited by cruzin101 : 05-27-2005 at 12:40 PM.